/
How To Add A Custom Start-up Screen
How To Add A Custom Start-up Screen
How To Add A Custom Startup Screen
Applicable Model/Year:
All V3 Accessports
How To Enable:
This feature comes pre-enabled on all V3 Accessports. If the option does not appear, you may need to update the firmware on your Accessport or your version of Accessport Manager
Steps to Use:
Connecting to Accessport Manager:
- Plug your Accessport into your computer.
- Open up Accessport Manager
- Click Connect (if Auto Connect isn't turned on)
Adding Custom Startup Screen
- Drag any type of supported image into the file area of Accessport Manager (JPEG/JPG, BMP, GIF and PNG are all supported)
- You can also press the "Import Image" button and select a file that way.
- On the right hand side of Accessport Manager click the button that looks like a camera
- Select which file you want to use.
- Click "Yes" to import that image as the Accessport startup screen.
- If the image size is not optimal you will see a popup message, you can either exit out and resize it, or click "OK" for it to be resized automatically.
- In order to restore the default startup image delete "startup_screen.fb" file from the Accessport by highlighting it and then clicking the garbage can.
- Enjoy!
Related content
Customizable Startup Screen Setup
Customizable Startup Screen Setup
More like this
How To Configure Shift Light
How To Configure Shift Light
Read with this
Accessport Manager Manual
Accessport Manager Manual
More like this
Accessport How To Guides
Accessport How To Guides
Read with this
Accessport Auto On/Off
Accessport Auto On/Off
More like this
How To Update Your Vehicles Map After Firmware Updates
How To Update Your Vehicles Map After Firmware Updates
Read with this
Copyright 2025 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com