How To Update Your Vehicles Map After Firmware Updates

How To: Update Your Vehicles Map After Firmware Updates



Applicable Model/Year: 

This applies to all versions of Accessport



Steps to Use:

NOTE: When flashing be sure to follow all recommended procedures and processes both onscreen and in the Accessport instruction manual.


Option 1.

  1. After updating your unit to the newest firmware plug it into your vehicle.
  2. Turn the vehicle on, but do not start
  3. Go into the tuning menu and select "change map"
  4. When choosing a map, select the newest map version. (the version is denoted by a "V" followed by a series of numbers.
  5. Follow the onscreen prompts to finish flashing your new map onto your vehicle.


Option 2.

  1. After updating your unit to the newest firmware plug it into your vehicle
  2. Turn the vehicle on but do not start.
  3. From the main menu select "Uninstall"
  4. Follow all onscreen prompts to finish the uninstall process.
  5. After uninstalling the map, turn the vehicle off and count to ten.
  6. Turn the vehicle back on and select "Install/Marry"
  7. When selecting what map to install select your new map version (the version is denoted by a "V" followed by a series of numbers.
  8. Follow the onscreen prompts to finish the install process with your new map.



Related Articles:


How To Update Your AP's Firmware


Accessport Instruction Manual PDF: https://cobb.app.box.com/v/ap3-sub-qsg



Link Dump:

Installing V3 Accessport


Installing V2 Accessport



Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com