How To:Change/Reset Gauges

Applicable Model/Year: 

• All Vehicles

How To Enable:

This feature comes pre-enabled on all Accessport-compatible vehicles.

Steps to Use:

How To Change Number Of Parameters Displayed

1. Link your Accessport to your vehicle and turn it on.
2. Select "Gauges" from the main menu
3. Go up and select "Setup"
4. Select "Change Gauge Layout.  This enables you to choose the number of gauges displayed (as you add more parameters they get smaller)
5. Once selected, you're done!

How To Change What Parameter Is Displayed

1. Link your Accessport to your vehicle and turn it on.
2. Select "Gauges" from the main menu
3. Scroll up or down until the gauge you want to change is selected
4. Select Change Monitor
5. Select the monitor you wish to view from the selected list
6. Once selected, you're all done!

How To Reset Min/Max Values

1. Link your Accessport to your vehicle and turn it on.
2. Select "Gauges" from the main menu
3. Go up and select "Setup"
4. Scroll up or down until the gauge you want to change is selected
5. Select "Reset All" (resets all gauges) or Reset Current (only resets the currently selected gauge)
6. Once selected, you're all done!

Things To Look Out For:

Keeping an eye on your engine's health is important, but keeping an eye on the road is much more critical, if you're worried about a specific parameter, it may be safer to datalog instead of watch the live data.

Related Articles:

How to Change Datalog Monitors

Datalogging Review for Ford Vehicles

Porsche Vehicles: Datalogging