862010 - COBB Tuning Rear Wiper Delete

862010 – COBB Tuning Rear Wiper Delete




Congratulations on your purchase of the COBB Tuning Rear Wiper Delete! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

IMPORTANT! Installing this kit will may not be legal in your area depending on local or federal regulations.  Make sure to check your local laws before installing this product



Table of Contents




Parts List


  • Wiper Delete Top
  • Wiper Delete Backing
  • O-ring seal
  • M8 x 1.25 nylon nut
  • (2) Push in Bumpers
  • (3) 4" Zip Ties
  • (3) 6" Zip Ties
  • Set of 3 different sized Rubber Washers






Error rendering macro 'excerpt-include' : You can only link to a page or blog post.