COBB Hitch Lock

CO-Hitch Lock  –  COBB Hitch Lock

5/8" Tow Hitch Pin

Congratulations on your purchase of the COBB Tuning Hitch Lock! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Table of Contents

Pin Installation

  1. In order to open up the pin you'll need to unlock it first.  To do so press in the key and turn.  You'll know it's unlocked when the center of the lock goes outwards.


  2. You'll notice that with the pin disassembled the key is retained in place.  To remove you'll need to re-lock it.


  3. Insert the pin through your rusty tow hitch.


  4. Press the lock end over the pin ensuring it seats all the way.

    The lock end of the pin will NOT go on if it is locked.

  5. Press down the lock cylinder to lock it in place.


Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center


Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)


return to

Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. |