715665 – 1" Universal LF BPV

Congratulations on your purchase of the COBB Tuning 1" Universal LF BPV! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Parts List

6mm Silicon Hose
(3) Zip Ties
(2) Stickers

Tools Needed

Hand Tools

Phillips head screwdriver
Flathead screwdriver
Needlenose pliers

BPV Installation

Start out by removing the Original BPV by unscrewing hose clamps or removing the factory spring clamps
Insert the bpv nose first into the recirculation tube, leaving the clamp loose for now to allow for movement. Make sure it goes all the way in.
Now insert the lower portion and tighten down both hose clamps.
Attach the factory boost reference or run a new one using the provided silicon line.

If you need to adjust the top bolt, re-torque to 60 in/lbs
If desired clamp down the hose using a zip tie.
Place your CARB sticker somewhere permanent and easily viewable by CARB officials (We recommend the radiator support). Make sure to clean the surface first to ensure the sticker sticks properly.
You're all good! Go out and enjoy!