COBB Custom Features: Launch Control on MK6 Vehicles


How To:Activate Launch Control on MK6 Vehicles


Applicable Model/Year: 

  • USDM MK6 GTI


How To Enable:

This feature is enabled on all OTS Maps

The vehicle will need to meet the following conditions for the ECU to allow it to happen.

  • Coolant Temp Min-Max (160F - 250F)
  • Engine Oil Min-Max (160F - 250F)
  • Gearbox Oil Temp Min-Max (122F - 212F)
  • EGT MAX (1835F)
  • Steering Wheel Angle (within 20 degrees of being completely straight)


How To Use Launch Control

Manual Transmission

  • Depress and hold the clutch pedal to 100%
  • Move the shifter to 1st gear
  • Depress and hold the gas pedal to 100%
  • Once the rev limit has been reached, release the clutch pedal

DSG Transmission

  • Depress and hold the brake pedal to 100%
  • Move the shifter to Sport Mode
  • Depress and hold the gas pedal to 100%
  • Once the rev limit has been reached, release the brake pedal


Available Adjustments and How to Make them:

Adjustments are available on the Accessport directly.

1.Go into the Tune Menu


2. Select "Adjustments"


3.From there select Launch Control Rev Limit Slot


4.Select your desired slot.  These slots are completely customizable through our Accesstuner and Accesstuner Pro software, however the default slot RPM values are as follows.

  • Slot 1 (default) - 3500 RPM
  • Slot 2 - 3750 PRM
  • Slot 3 - 4000 RPM
  • Slot 4 - 4250 RPM
  • Slot 5 - 4500 RPM
  • Slot 6 - 4750 RPM


5. The load target for Launch Control can also be adjusted with Launch Control Load Offset.  Load can be increased from this adjustment menu between 0 and 300 Nm above what your OTS map or Protune is calibrated to target.  This may be beneficial if you're using stickier tires and find that the car is bogging down during launch.

To view your map's load target for Launch Control, check out the monitor 'LC Engine Load Target' in the Gauges section of your Accessport.  Increases made to LC Load Offset will be reflected in this monitor:

LC Engine Load Target = (LC Load Target table values) + (LC Load Offset)





Things To Look Out For:

WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL.  THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE





Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059

Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com