[ 1 How To: Cobb Custom Features: Launch Control on Subaru Vehicles ] [ 1.1 Applicable Model/Year: ] [ 1.2 How To Enable: ] [ 1.3 Steps to Use: ] [ 1.4 Available Adjustments,When And Why To Adjust : ] [ 1.5 Things To Look Out For: ] [ 1.6 Related Articles: ] [ 1.7 How To Update Your AP's Firmware ]

How To: Cobb Custom Features: Launch Control on Subaru Vehicles

Applicable Model/Year:

All Subaru Vehicles Manual Transmission Only

How To Enable:

This feature comes pre enabled on all applicable models. If you are finding this doesn't work correctly ensure you are on the most recent firmware and map updates.

Navigate to the Adjustments menu from the main screen of the Accessport.
Select Adjustments
Choose the Launch Control option
The value here will be set to 8000rpm by default every time the vehicle is flashed. Lower it to your target launch RPM
Click the middle button to save.
It’s now enabled!

Steps to Use:

Bring vehicle to a complete stop
Fully depress the clutch pedal.
Put the transmission in 1st gear
Press the accelerator pedal to the floor quickly, vehicle will now hold at the specified RPM level.
Release the clutch, and go!

Available Adjustments,When And Why To Adjust :

Shifting RPM LImit

Go to Tune Menu
Select Adjustments
Select Change LC Limit or Launch Control (depending on your vehicle the verbage may change between the two)
Adjust to whatever RPM desired and then click the center button to save those changes.

Things To Look Out For:

WARNING - USE OF THIS SYSTEM IS VERY ABUSIVE AND WEARING ON THE VEHICLES ENGINE, CLUTCH, TRANSMISSION, AXLES, DIFFERENTIAL AND TIRES. THE USER ACCEPTS ALL RISK AND RESPONSIBILITIES WHEN USING THIS FEATURE.

Customer Support Center

COBB Custom Features: Using Launch Control on Subaru Vehicles

How To: Cobb Custom Features: Launch Control on Subaru Vehicles

Applicable Model/Year:

How To Enable:

Steps to Use:

Available Adjustments,When And Why To Adjust :

Things To Look Out For:

Related Articles:

How To Update Your AP's Firmware

Related content