Subaru Vehicles: How to tell what features are enabled on your map
Table of Contents
Applicable Accessports:
AP3-SUB-001
AP3-SUB-002
AP3-SUB-003
AP3-SUB-004
AP3-SUB-005
AP3-SUB-006
AP3-AU-SUB-003
AP3-AU-SUB-004
Minimum Firmware Version:
1.7.4.2-21409
Steps to Use:
From the main menu of your Accessport, navigate to the Tune Menu.
Select "Show Custom Features"
It will now display a list of the enabled custom features found in the map.
Feature | Options |
|---|---|
Flex Fuel |
|
Launch Control |
|
Flat-Foot-Shift |
|
Realtime Version |
|
Logging Type |
|
Not all features are available for every vehicle.
Launch Control and Flat-Foot-Shift can be disabled by setting the rpm limit to an unattainable level, thus it is possible for these features to show up as enabled but you won't be able to utilise them until you adjust the launch/shift limit to an appropriate value.
Related Articles
Definitions
Links