GR TMIC Removal
This removal applies to the following vehicles
- 2008 - 2014 WRX
- 2005 - 2009 Legacy GT
- 2005 - 2009 Outback XT
- 2008 - 2013 Forester XT
- Locate the factory BPV and remove the recirculation hose by squeezing down the hose clamp with your pliers.
- Remove the vacuum reference line from the rear port of the BPV
- Moving to the other side, unbolt the flange where it meets the turbo using a 12mm socket.
- Undo the hose clamp attaching the throttle body coupler to the intercooler. This will typically require a phillips screwdriver, 7 or 8mm socket.
- Unbolt the remaining 12mm bolt going to the intercooler support bracket and remove the intercooler from the car.