/
Factory FPR Line and Idle Issues

Factory FPR Line and Idle Issues



On the Mitsubishi Evo X, there is a vacuum line that goes from the intake manifold to the Fuel Pressure Regulator (FPR).

From the factory, this hose is not secured and can pop off causing the car to run lean or have a poor idle.

A quick ziptie installed on the hose itself (where circled in red) can help secure this hose and prevent this issue. 

Related Links

Knowledge Base - for additional advanced support

Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059



return to www.cobbtuning.com


Related content

Surging MAF Readings
Surging MAF Readings
More like this
Mitsubishi Evo X Diagnostic Trouble Codes (Check Engine Lights)
Mitsubishi Evo X Diagnostic Trouble Codes (Check Engine Lights)
More like this
Evolution X Spark Plug Failure
Evolution X Spark Plug Failure
Read with this
Mitsubishi Evolution X Injector Installation
Mitsubishi Evolution X Injector Installation
More like this
Mitsubishi
Read with this
Mitsubishi [Discontinued]
Mitsubishi [Discontinued]
More like this

Copyright 2025 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com