Ford Mustang EcoBoost High Performance Package 2020+
Supported Vehicles:
USDM 2020 - 2023 Mustang HPP EcoBoost AT
USDM 2020 - 2023 Mustang HPP EcoBoost MT
EDM 2020 Mustang HPP EcoBoost AT
EDM 2020 Mustang HPP EcoBoost MT
Â
Map VersionsÂ
2020-2023 High Performance Pack |
---|
|
COBB Custom ECU Features
Not available on all model years at this time. Check each item below for vehicle compatibility.
Required Accessport Firmware:
V3:Â 1.7.4.2-19560 or greater
Fuel Requirements:Â
Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.
Maps designated with "87" are for use with 87 and 89 octane fuel or better.
Maps designated with "91" are for use with 91 and 92 octane fuel or better.
Maps designated with "93" are for use with 93 and 94 octane fuel or better.
Â
Maps designated with "95" are for use with 95 RON fuel or better.
Maps designated with "98" are for use with 98 RON fuel or better.
Â
Stage1
Intake Requirement: Stock airbox and filter or COBB air filter 7M1101
Exhaust requirement: Stock exhaust, or COBB Cat-Back Exhaust 5M2150
Boost Level:
91 OCT or 95 RON Minimum Up to ~23.5psi tapering to ~18psi by redline. (+/- 2psi).
93 OCT or 98 RON Minimum Up to ~23.5psi tapering to ~18psi by redline. (+/- 2psi).
Stage2
Intake Requirement: Stock airbox and filter or COBB air filter 7M1101
Intercooler Requirement: COBB front mount intercooler system 7M1500
Exhaust requirement:Â Stock exhaust, or COBB Cat-Back Exhaust 5M2150
Boost Level:
91 OCT or 95 RON Minimum Up to ~23.5psi tapering to ~19psi by redline. (+/- 2psi).
93 OCT or 98 RON Minimum Up to ~23.5psi tapering to ~19psi by redline. (+/- 2psi).
C.A.R.B Note
The above Stage1 and Stage2 calibrations are legal for use on Emissions Controlled Vehicles in all 50 states when used in accordance with the manufacturer's application guide because it and the parts have a California Air Resources Board (CARB) Executive Order (EO) number:Â
Non-Performance Maps
Stage0
Stock style map that allows datalogging
Anti-Theft Mode
Will not allow vehicle to run
Valet Mode
Fuel Requirements: 87+ Octane (RON+MON/2) (89+ RON) fuel minimum
Intake / Exhaust Requirements: Any
Boost: Stock Settings
Rev Limiter: 3100 RPM
Speed Limiter: 35mph (56.3 kph)
Â
Â
Closing Warnings and Precautions:
Use of inappropriate calibration/modification combinations will promote engine damage.
Seek the help of a professional COBB Accesstuner Professional should your vehicle fall outside of OTS configurations.
COBB OTS mapping is NOT designed to be used with upgraded aftermarket boost actuators or solenoids. Doing so may result in much higher than desired boost and potential engine damage. Seek the help of a COBB Accesstuner Professional should your vehicle fall outside of OTS configurations.
Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.
Â
Revision History:Â
Revision # | Notes: |
---|---|
v105 | Fixed bug causing intermittent throttle closures on 21-23 AT vehicles. Other vehicles updated for version parity. |
v104 | Added support for 2023 EcoBoost Mustang |
v103 | Fixed Transbrake load targeting for 2021 AT vehicles. Other vehicles updated for version parity. |
v102 | Fixed bug in user-adjustable transbrake load targeting for all AT vehicles; all MT maps uprev'ed for version parity. |
v101 | Original release of Stage 3 maps |
v100 | Original Release Calibration.  Adjusted fuel, ignition timing, boost control, throttle ramping. Adjusted compensations for more consistent power delivery. Adjusted torque, gear, load, boost, airflow, temperature, speed, and rev limits. All changes to the OEM strategies are designed for overall efficiency and consistency. |
Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com