Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.
Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.
- 94 octane with 0% Ethanol should run the ACN91 Map.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel.

Gen2 BRZ/GR86 Power Output

Stage1 Hard Parts Requirements

Exhaust Requirements: Stock or upgraded catback exhaust.
Intake Requirements: Stock air box and filter or upgraded high-flow air filter.

Non-Performance Maps

Anti-Theft Mode

Once Flashed will prevent the vehicle from starting

Stock

Puts your car as close to back to stock as possible

Traditional EcuTek RaceROM Features

Closing Warnings and Precautions:

Use of inappropriate calibration/modification combinations will promote engine damage.
Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.

Version	Notes

Version	Notes
v100	Initial Release
v101	Updated a small selection of roms affected by a copy utility error. non-critical update

PRS:Contact Us:

Customer Support Center

Map Notes for Gen2 BRZ, GR86

Supported Vehicles

Map Versions

Helpful Links