Map Notes for Gen2 BRZ, GR86
Supported Vehicles
Subaru BRZ 2022 - 2024
Toyota GR86 2022 - 2024
Map Versions
Stage1 v100
Helpful Links
How to flash your car or change map - ECU Connect Vehicle Flashing
Datalogging guide - Datalogging Review for Gen2 BRZ, GR86 Vehicles
Fuel Requirements:
Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.
Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.
Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.
94 octane with 0% Ethanol should run the ACN91 Map.
Running 0% Ethanol Fuels
These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel.
Gen2 BRZ/GR86 Power Output
Stage1 Hard Parts Requirements
Exhaust Requirements: Stock or upgraded catback exhaust.
Intake Requirements: Stock air box and filter or upgraded high-flow air filter.
Non-Performance Maps
Anti-Theft Mode
Once Flashed will prevent the vehicle from starting
Stock
Puts your car as close to back to stock as possible
Traditional EcuTek RaceROM Features
Closing Warnings and Precautions:
Use of inappropriate calibration/modification combinations will promote engine damage.
Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.
Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com