8P2600, 8P2700 – Fuse Box Cover for Porsche

991 2012 - 2016
718 2016 - 2017
981 2012 - 2016

Congratulations on your purchase of the COBB Tuning Porsche Fuse Box Cover! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Parts List

Porsche Fuse Box Cover

Tools Needed

Hands

Fuse Cover Removal

Park your car in a safe place.
Locate your Fuse Box, in most cases it will be on the outside of the footwell on the driver's side (USDM)
Go ahead and remove the stock fuse cover, in order to do so pull out on the tab to pop out the retaining clips, then lift up to remove it from the panel.
Now go ahead and move the rod over. To do so lift up and out to pop the rod out of the clips, or slide it upwards and out. Watch out as too much pressure can bend the rod.
Now go ahead and install the rod into the new COBB Fuse Box Cover
With everything together you should be able to go ahead and install the new fuse cover by dropping the bottom tabs into the slots first, then pushing it in towards the panel and fuse box until the clips seat.
You're all done! Now you can plug in your Accessport and go!