Supported Vehicles

Subaru WRX 2022 - 2025

Map Versions

Map	Version
Stage0 Stage1	v311
Stage2	v312

Required Accessport Firmware

AP3-SUB-006: 1.7.6.0-27036

Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.
Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.
- 94 octane with 0% Ethanol should run the ACN91 Map.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel.

VB WRX Power Output

WRX CVT Stage1

Stage1 Hard Parts Requirements

Exhaust Requirements: Stock or upgraded catback exhaust.
Intake Requirements: Stock air box and filter
Intercooler Requirements: Stock
Boost Level
- 93 Octane 98 RON Minimum: ~15.2psi peak boost pressure tapering down as you approach redline, +/- 1.5psi.
- 91 Octane 95 RON Minimum: ~14.2psi peak boost pressure tapering down as you approach redline, +/- 1.5psi

VB WRX CVT Stage1+Flex Fuel

Stage1+FF Hard Parts Requirements

Exhaust Requirements: Stock or upgraded catback exhaust.
Intake Requirements: Stock air box and filter
Fuel System:
- VB CAN Flex Fuel Kit 345650
- VB Fuel Pressure Sensor Kit 346700
Intercooler Requirements: Stock
Boost Level
- 93 Octane 98 RON Minimum:
  - On E10 ~15.2psi peak boost pressure tapering down as you approach redline, +/- 1.5psi.
  - On E85 ~16.2psi peak boost pressure tapering down as you approach redline, +/- 1.5psi.
- 91 Octane 95 RON Minimum:
  - On E10 ~14.2psi peak boost pressure tapering down as you approach redline, +/- 1.5psi
  - On E85 ~16.2psi peak boost pressure tapering down as you approach redline, +/- 1.5psi

Stage2

Stage2 Hard Parts Requirements

Exhaust Requirements: Stock or upgraded catback exhaust.
Intake Requirements:
- Stock air box and filter
- COBB Aluminum Intake Tube - 746100
- COBB FA24 Charge Pipe - 746110
Intercooler Requirements:
- COBB Top Mount WRX Intercooler - B41450
  or
- COBB Front Mount WRX Intercooler - 746550-BK or 746550-SL
Boost Level
- 93 Octane 98 RON Minimum: ~18.2 psi peak boost pressure tapering down as you approach redline, +/- 1.5psi.
- 91 Octane 95 RON Minimum: ~17.4 psi peak boost pressure tapering down as you approach redline, +/- 1.5psi

Map Notes for ADM VB WRX CVT