COBB Custom Features: Using Launch Control on Mazda Vehicles
How To: Use Launch Control
Applicable Model/Year:
Mazdaspeed3 2007-2013
Mazda3 MPS 2006-2011
Mazdaspeed Axela 2006-2011
Mazdaspeed6 2006-2007
Mazda6 MPS 2005-2006
Mazdaspeed Atenza 2005-2006
How To Enable Launch Control:
Version 2 Accessport
Launch Control must be enabled through either Accesstuner or Accesstuner Pro software.
Version 3 Accessport.
With the Accessport hooked up to your vehicle
Select Tune menu
Go to "Setup"
Enable launch control in the settings menu.
Select Change Map
After choosing a map which has launch control enabled you will be asked what RPM to launch at.
After that follow the rest of the normal map change process.
You're Done!
Steps to Use:
Bring vehicle to a complete stop
Fully depress the clutch pedal.
Put the transmission in 1st gear.
Press the accelerator pedal to the floor quickly, vehicle will now hold at the specified fuel cut level.
Release the clutch.
Available Adjustments and How to Make them:
Version 2 Accessport
All adjustments must be made through the Accesstuner or Accesstuner Pro software.
Version 3 Accessport
Select Tune menu on Accessport
Select Change Map
After choosing your map you will be asked what RPM to launch at.
After that follow the rest of the normal map change process.
Things To Look Out For:
WARNING - USE OF THIS SYSTEM IS VERY ABUSIVE AND WEARING ON THE VEHICLES ENGINE, CLUTCH, TRANSMISSION, AXLES, DIFFERENTIAL AND TIRES. THE USER ACCEPTS ALL RISK AND RESPONSIBILITIES WHEN USING THIS FEATURE.
