COBB Custom Features: Burnout Mode on MQB Vehicles

COBB Custom Features: Burnout Mode on MQB Vehicles











Applicable Model/Year: 

  • MK7 GTI
  • MK7 Golf R
  • MK7.5 GTI
  • A7 Jetta GLI
  • Audi 8V S3


How To Enable:

This feature is enabled on all OTS Maps

The vehicle will need to meet the following conditions for the ECU to allow it to happen.

  • Coolant Temp Min-Max (160F - 250F)
  • Engine Oil Min-Max (160F - 250F)
  • EGT MAX (1835F)
  • Steering Wheel Angle (within 20 degrees of being completely straight)


Steps to Use:

Golf R Will need to be set to "Dyno Mode" in order to disable the rear axle.  If enabled the car will essentially just launch itself with a higher RPM than launch control would otherwise allow.
How to: Put MK7 Golf R in "Dyno Mode" (FWD)

Manual Transmission

  • Engage the parking brake
  • Enable cruise control
  • Press and hold the cruise control "set" button
  • Depress and hold the clutch pedal to 100%
  • Move the shifter to 1st gear
  • Depress and hold the throttle pedal to 100%
  • Release the clutch pedal
  • Continue to hold the "set" button for as long as you'd like to do the burnout

DSG Transmission

  • Engage the parking brake
  • Enable cruise control
  • Press and hold the cruise control "set" button
  • Depress and hold the brake pedal to 100%
  • Move the shifter to Sport Mode
  • Depress and hold the throttle pedal to 100%
  • Release the brake pedal
  • Continue to hold the "set" button for as long as you'd like to do the burnout


Things To Look Out For:



Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059