Porsche Macan S 95B Map Notes

Supported Vehicles:

Porsche Macan

2014 - 2018 Porsche Macan S (95B) WM
2017 - 2018 Porsche Macan GTS (95B) WM
2014 - 2018 Porsche Macan Turbo (95B) WM
2017 - 2018 Porsche Macan Turbo Performance Package (95B) WM
2017 - 2018 Porsche Macan 2.0L (95B) USDM

Currently Unsupported Porsche Macan Models

2014 - 2018 Macan S Diesel (95B)

Map Revision:

Porsche Macan Base 2.0L (95B) USDM	Porsche Macan S (95B) WM	Porsche Macan GTS (95B) WM	Porsche Macan Turbo (95B) WM	Porsche Macan Turbo Performance Package (95B) WM
Stage0 v209 Stage1 v209	OEM+ v208 (for Macan S ONLY) Stage0 v208 Stage1 v208	Stage0 v208 Stage1 v208	Stage0 v208 Stage1 v208	Stage0 v208 Stage1 v208

Required Accessport Firmware:

AP3-POR-009: 1.7.3.0-18814 or greater

Map Availability:

Download from the COBB Tuning Porsche Map Database

Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

Maps designated with "ACN91 OCT or 93 RON" are for use with 91 octane fuel found in Arizona, California, and Nevada, Canadian 94 Octane and 94 Octane with 0% ethanol, 93 RON fuel or better.
Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.
Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.
- 94 octane with 0% Ethanol should run the ACN91 Map.
Maps designated with "100 OCT or 102 RON" are for use with 100 octane/102 RON fuel or better.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel.

***Vehicles equipped with Sport/ Sport Plus modes must leave the key in the off position for 90 seconds after an ECU flash for these features to re-enable.***

Macan S Stage 1

Macan S 3.0L	Peak Gains	Max Gains
Stage1 93 (98RON):	+10.74% HP, +43.47% TQ	+51.83% HP, +51.83% TQ

Stage0

Stock calibration. Factory map that the car was delivered on the vehicle from Porsche. Does not uninstall Accessport.

Stage1

Exhaust Requirements: Stock or upgraded catback exhaust.
Intake Requirements: Stock air box with stock or Alpha Performance High Flow Air Filter.
- Notes: Stage1 maps are conservative and designed to be safe for the designated fuel requirements. Additional performance gains may be achieved through custom tuning efforts.
Intercooler Requirements: Stock

Results may vary

Peak Gains are measured as the absolute maximum value between the highest points of two plots.
Max. Gains are measured as the average maximum value between the highest and lowest point of two plots.

OTS maps are not compatible with iPE Exhaust systems or any other valved exhaust system that is not controlled by the vehicle's ECU

Closing Warnings and Precautions:

Use of inappropriate calibration/modification combinations will promote engine damage.
Seek the help of a professional COBB Protuner should your Porsche fall outside of OTS map requirements.
Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.
For track events, we recommend adding at least 2 gallons of 100 octane fuel to battle high track temperatures.

Revision Notes:

Version	Notes
V209	Maps updated for various table fixes for Macan Base
V208	Maps description fixes
V207	Maps updated for various monitor fixes
V206	New Fuel Pressure monitors for the Macan S/GTS/Turbo
V205	Addition of Macan Turbo Performance Package support. Also, Macan S/GTS/Turbo Stage1 Maps have been further refined to provide smoother low to high load transitions and better all around driveability. Macan 2.0L is still on v203.
V203	Fixed rare issue in the Macan 2.0L vehicles where an overboost code would appear. Macan S/GTS/Turbo are still on V202.
V202	Fixed an issue with V201 that would cause some GTS vehicles to go into limp mode. S and Turbo maps are unchanged from V201. Initial Launch Calibrations for Macan Base 2.0L.
V201	Revised tuning strategy for S, GTS, and Turbo. Increased output in all models.
V102	Full Fix deployed for intermittent driveability issues encountered only on the Macan Turbo. Macan S and GTS set to V102 for conformity.
V101	Temporary beta revisions added for Macan Turbo, Macan S and GTS set to V101 for conformity.
V100	Initial Release Calibration. Adjusted ignition timing, airflow limits, torque limits, and fuel as well as other tables that help maintain drivability and increase performance all while maintaining reliability.