COBB Custom Features: Map Switching On Mitsubishi

How To:On the Fly Map Switching on Mitsubishi Vehicles

Applicable Model/Year: 

  • Mitsubishi Evo X
    • GSR, MR, FE
      • 2008-2015

  • Mitsubishi Lancer Ralliart
    • 2008-15


How To Enable:

This feature comes enabled on all OTS Maps v400 and higher on all stages 1-4

Steps to Use:

  1. Flash a map to the car that has map switching available.

  2. Press and hold the cruise control on/off button for 2-3 seconds

  3. The intercooler spray light will begin a slow flash and continue to flash to confirm changing to map slot 2

  4. In order to change to slot 1, you'll want to do the same thing as above which will reverse it back.



On OTS maps:

Map slot 1 is performance

Map slot 2 is a economy map with lower performance which can also be used as a valet style map.

Available Adjustments and How to Make them:

All specific adjustments to what is changed are made through the Accesstuner and Accesstuner Pro software.

  • Boost Target Engine Load #1A (High Gear Range)

  • Boost Target Engine Load #2 (Low Gear Range)

  • Cranking Enrichment IPW Adder (Main)

  • Fuel Injector Scaling

  • High Octane Fuel Map

  • High Octane Timing Map

  • Passive Solenoid Base WGDC Map #1A (High Gear Range)

  • Passive Solenoid Base WGDC Map #2 (Low Gear Range)

  • Reactive Solenoid Base WGDC Map #1A (High Gear Range)

  • Reactive Solenoid Base WGDC Map #2 (Low Gear Range)

Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059

Copyright 2023 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com