COBB Custom Features: Map Switching On Mitsubishi
How To:On the Fly Map Switching on Mitsubishi Vehicles
Applicable Model/Year:
Mitsubishi Evo X
GSR, MR, FE
2008-2015
Mitsubishi Lancer Ralliart
2008-15
How To Enable:
This feature comes enabled on all OTS Maps v400 and higher on all stages 1-4
Steps to Use:
Flash a map to the car that has map switching available.
Press and hold the cruise control on/off button for 2-3 seconds
The intercooler spray light will begin a slow flash and continue to flash to confirm changing to map slot 2
In order to change to slot 1, you'll want to do the same thing as above which will reverse it back.
On OTS maps:
Map slot 1 is performance
Map slot 2 is a economy map with lower performance which can also be used as a valet style map.
Available Adjustments and How to Make them:
All specific adjustments to what is changed are made through the Accesstuner and Accesstuner Pro software.
Boost Target Engine Load #1A (High Gear Range)
Boost Target Engine Load #2 (Low Gear Range)
Cranking Enrichment IPW Adder (Main)
Fuel Injector Scaling
High Octane Fuel Map
High Octane Timing Map
Passive Solenoid Base WGDC Map #1A (High Gear Range)
Passive Solenoid Base WGDC Map #2 (Low Gear Range)
Reactive Solenoid Base WGDC Map #1A (High Gear Range)
Reactive Solenoid Base WGDC Map #2 (Low Gear Range)
Customer Support
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059