How To:On the Fly Map Switching on Mitsubishi Vehicles

Applicable Model/Year: 

• Mitsubishi Evo X
  • GSR, MR, FE
    • 2008-2015
      
      
• Mitsubishi Lancer Ralliart
  • 2008-15

How To Enable:

This feature comes enabled on all OTS Maps v400 and higher on all stages 1-4

Steps to Use:

1. Flash a map to the car that has map switching available.
   
   
2. Press and hold the cruise control on/off button for 2-3 seconds
   
   
3. The intercooler spray light will begin a slow flash and continue to flash to confirm changing to map slot 2
   
   
4. In order to change to slot 1, you'll want to do the same thing as above which will reverse it back.

On OTS maps:

Map slot 1 is performance

Map slot 2 is a economy map with lower performance which can also be used as a valet style map.

Available Adjustments and How to Make them:

All specific adjustments to what is changed are made through the Accesstuner and Accesstuner Pro software.

• Boost Target Engine Load #1A (High Gear Range)
  
  
• Boost Target Engine Load #2 (Low Gear Range)
  
  
• Cranking Enrichment IPW Adder (Main)
  
  
• Fuel Injector Scaling
  
  
• High Octane Fuel Map
  
  
• High Octane Timing Map
  
  
• Passive Solenoid Base WGDC Map #1A (High Gear Range)
  
  
• Passive Solenoid Base WGDC Map #2 (Low Gear Range)
  
  
• Reactive Solenoid Base WGDC Map #1A (High Gear Range)
  
  
• Reactive Solenoid Base WGDC Map #2 (Low Gear Range)
  
  

Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059