Supported Vehicles:
Current Map Revision:
Required Accessport Firmware:
Map Availability: Download from the COBB Tuning Evolution X OTS Map Database
Map Version Notes:
Note: All performance maps are equipped with 2-way map switching. Performance maps are by default loaded into the first map slot and an economy map is loaded in the second map slot. |
Stage 1 Maps (Map0 – Performance, Map1 – Economy)
Notes: The additions of any other hardware may cause the vehicle to perform poorly |
Non Performance Maps
Closing Warnings and Precautions:
Revision Notes:
Version# | Notes: |
---|---|
v500 |
|
v404 |
|
v403 |
|
v402 |
|
v401 |
|
v400 | Limited Beta map support released with new 2-Way Switching strategy. |
v107 | This calibration was updated to match the latest performance map revisions and includes corrections made to stabilize idle. |
v106 | This calibration was updated to match the latest performance map revisions and Includes Cranking Enrichment table settings from the newer 2010 models. |
v105 | This calibration was updated to match the latest performance map revisions. |
v104 | The Torque Monitor function has been defeated. |
v101 | Maps updated to match latest performance map strategy. |
v100 | Original Calibration. Adjusted boost, fuel, ignition, camshaft phasing and base programming logic to improve driving quality and performance. Revised Closed Loop management for improved driving quality. Smoothed out boost related values, improved boost response at lower RPM. Altered intake camshaft phasing parameters in an effort to improve low and midrange torque and boost response. Smoothed ignition advance mapping for low and mid RPM response. |