Transbrake Enable/Disable- Realtime

A real time table to activate or disable the transbrake system.  All ROM's have it active by default, to change the state you'll need to be either live connected to the vehicle in Accesstuner Pro/ Accesstuner.  Or utilize the Accessport's adjustments menu to disable it.

Transbrake Load Target (1st Gear)

Transbrake Load Target (2nd Gear)

Transbrake Load Target Pedal Threshold

Transbrake Load Target User Adjust- Realtime

User Adjustment done on the Accessport or while live-connected to the vehicle.  Value persists after key-cycling.

Transbrake Load Target User Adjust (Max)

Transbrake Load Target User Adjust (Min)

Safety Thresholds

Active Time (Max)

Clutch Slip (Max)

Engine Coolant Temp (Hysteresis)

Engine Coolant Temp (Max)

Engine Coolant Temp (Min)

Knock Count (Max)

Transmission Fluid Temp (Hysteresis)

Transmission Fluid Temp (Max)

Transmission Fluid Temp (Min)

Transbrake Bump Ramp Out Time

Transbrake Bump Time- Realtime

User Adjustment done on the Accessport or while live-connected to the vehicle.  Value persists after key-cycling.

Transbrake Creep Integral Gain

Transbrake Creep Pressure (1st Gear)

Transbrake Creep Pressure (2nd Gear)

Transbrake Creep Pressure User Adjust- Realtime

User Adjustment done on the Accessport or while live-connected to the vehicle.  Value persists after key-cycling.

Transbrake Creep Proportional Gain

Transbrake Creep Ramp Out Time

Transbrake Creep Slip Target - Realtime

User Adjustment done on the Accessport or while live-connected to the vehicle.  Value persists after key-cycling.

Transbrake Staging Mode- Realtime

User Adjustment done on the Accessport or while live-connected to the vehicle.  Value persists after key-cycling.