43700 - Subaru EJ TGV Shaft Seal Kit
Vehicle Coverage
Congratulations on your purchase of the COBB Tuning EJ TGV Shaft Seal Kit! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Parts List
Tools Needed
Sockets
3/8"
3/8" ratchet
3/8" 12" extension
3/8" 6" extension
3/8" Socket Swivel
3/8" 10mm socket
3/8" 12mm socket
3/8" 14mm socket
3/8" 10mm deep socket
3/8" 12mm deep socket
Hand Tools
Phillips head screwdriver
3mm Allen Key
Needlenose pliers
Section 1
Section 2
Section 3
Section 4
Section 5
CARB Sticker Application
(Where Applicable)
Apply the supplied CARB sticker in a clear, easy to find location. Typically underhood, or on the radiator core support.
Links
MAP Notes
Helps to figure out which map you should be on given the parts installed to your car
Links for related parts