Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »




Applicable Accessports: 

  • AP3-SUB-001
  • AP3-SUB-002
  • AP3-SUB-003
  • AP3-SUB-004
  • AP3-AU-SUB-003
  • AP3-AU-SUB-004




Minimum Firmware Version:

1.7.4.2-21409






Steps to Use:

  1. From the main menu of your Accessport, navigate to the tune Menu.

  2. Select "Show Custom Features"




  3. It will now display a list of the enabled custom features found in the map.

        


FeatureOptions
Flex Fuel
  • Enabled V1 (discontinued)
  • Disabled
Launch ControlStd v1
Flat-Foot-ShiftStd v1
Realtime Version
  • v0
  • v1
Logging Type
  • K-Line
  • CAN (v1)



  • Not all features are available for every vehicle.
  • Launch Control and Flat-Foot-Shift can be disabled by setting the rpm limit to an unattainable level, thus it is possible for these features to show up as enabled but you won't be able to utilise them until you adjust the launch/shift limit to an appropriate value.






Related Articles:





Definitions:





Links:


Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059


return to www.cobbtuning.com


  • No labels