272300 - MazdaSpeed Shifter Bushings
2007-2012 Mazda3 MPS
2007-2012 Mazda3 Axela
2007-2013 MazdaSpeed 3
Congratulations on your purchase of the Mazda Shifter Cable Bushings! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
Table of Contents
Parts List
- (2) Male bushing Halves
- (2) Female Bushing Halves
- Blue Loctite
Tools Needed
Stock Intake Removal
- Park your car in a flat level area.
- Using a 10mm socket remove the negative battery terminal.
- Press in the release tab of the MAF connector and unplug the MAF sensor.
- Undo the two clips from the airbox.
- Using a 10mm socket loosen the intake clamp and remove the airbox lid from the car.
- Pull firmly upwards on the lower airbox in order to pop it free form the rubber grommets it sits in.
- Remove the PCV hose from the intake tube. You can either do this by removing the spring clamp with your pliers or squeezing the blue clip to release the tube.
- With the 10mm remove the clamp holding the intake to the turbo inlet and pull the intake tube free from the car.
Shifter Bushing Install
Links
Mazda Installation Instructions
Main Installation Instruction Repository for Mazda Parts
Link to Mazda Map Notes to see what map you should be on given the parts you've added
COBB Customer Support Web Support and Tech Articles: COBB Tuning Customer Support Center Email: support@cobbtuning.com Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST) 866.922.3059 return to www.cobbtuning.comContact Us: