Ford Focus RS Map Notes
Supported Vehicles:
- CHDM 2016-2018 Focus RS
- EDMÂ 2016-2018 Focus RS
- USDMÂ 2016-2018 Focus RS
All Focus RS |
---|
Map Revision:
|
Required Accessport AP-FOR-004 Firmware:
- V3:Â 1.7.3.0-17635 or greater
COBB Custom Features
- COBB Custom Features: 5-Way Map Switching on Ford Vehicles
- COBB Custom Features: Flat-Foot Shifting on Ford Vehicles
- COBB Custom Features: Ford EcoBoost Mustang Transmission Brake and Bump Box
- COBB Custom Features: Using Launch Control on Ford Vehicles
- COBB Custom Features: Disabling Auto Start/Stop on Ford Models
Map Availability: Download from the COBB Tuning Focus RS OTS Map DatabaseÂ
Peak Gains are measured as the absolute maximum value between the highest points of two plots.
Max. Gains are measured as the average maximum value between the highest and lowest point of two plots.
Results may vary. Power as tested on 2016 Focus RS vehicles using these identical calibrations.
Peak Gains are measured as the absolute maximum value between the highest points of two plots.
Max. Gains are measured as the average maximum value between the highest and lowest point of two plots.
Results may vary. Power as tested on 2016 Focus RS vehicles using these identical calibrations.
Calibration Strategy InformationÂ
See our Octane Adjust Ratio technical article for additional information regarding some of the strategies we utilize in these calibrations!Â
Feature Descriptions:Â
No hassle launch control
- Enabled on all v110 and up OTS calibrations, this features allows for easy use of the launch control system. Once a v110 or newer calibration file is flashed onto the vehicle, the process of getting into launch mode is simply having the clutch pedal and accelerator pedal depressed fully. The vehicle should quickly raise engine speed to the determined RPM set in the calibration file. These values can be found under the Map Notes heading for each OTS map above.Â
Flat foot shifting
- Enabled on all v110 and up OTS calibrations, this features allows the accelerator pedal to stay fully depressed while shifting the vehicle. The use of the clutch pedal will still be necessary, but keeping the accelerator pedal fully depressed between shifts allows for the turbo to stay spooled between gears. The RPM target value for the flat foot shifting feature can be found under the Map Notes heading fore each OTS map above.Â
5 Way map switching
- This feature enables users to switch between map slots on the fly. Once a v110 or newer calibration file is flashed onto the vehicle, the end user can use the factory cruise control system to switch between different maps. The number of available maps is adjustable with Accesstuner software. Custom tuned calibrations can contain up to 5 switchable maps. v110+ maps included with your Accessport or downloaded from the COBB Tuning website contain three maps that are switchable in real-time. Map 0 is the high performance map, map 1 is OEM performance setting, and map 2 is economy mode.
Revision History:Â
Version # | Notes: |
---|---|
v306 | Maps updated to remove unnecessary DTC Suppression |
v305 | Maps updated to address map slot switching bug. |
v304 | Maps updated to address launch control boost oscillation bug. |
v303 | Maps updated to address map slot switching bug. |
v302 | Maps updated for addition of Auto Start Stop via Accessport. |
v301 | Improved boost and throttle control while in launch control mode. |
v300 | Revamped tuning strategy. Applies more oconsistent torque delivery using changes to OEM modeling and calibration strategies. Eco Mode Upshift Indicator added to USDM vehicles. (An OEM feature in CHDM and EDM markets.
Exhaust Valve Activation modes and thresholds modified.
|
v111 | Updated map labels to include MY18 Focus RS support. |
v110 | COBB Custom Featured added to OTS calibrations. Custom features added include the following
|
v100 |
|
Custom Feature Cruise Control Button Assignments
Copyright 2024 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com