How To: Change Datalog Monitors
Applicable Model/Year:
- All Vehicles
How To Enable:
This feature comes pre-enabled on all Accessport-compatible vehicles.
V3
Steps to Use:
How To Change Number Of Parameters Displayed
- Link your Accessport to your vehicle and turn it on.
- Select "Gauges" from the main menu
- Go up and select "Setup"
- Select "Configure Datalogging"
- Select/de-select parameters you want to be logged
- When finished simply hit the back button to return to the gauges
How to Clear/Reset Datalogged Monitors
V2
- Navigate to the "Monitor" menu
- Select "Set Data Log List"
- Select/deselect monitors to datalog.
- Press the Cancel button to exit. A prompt is shown to confirm or cancel changes.