Open

2H2365-W, 2h2365-BK - Honda Short Weighted Knob Civic Type R 2022+

FL5 Civic Type R 2022+

Congratulations on your purchase of the COBB Tuning FK8 Civic Shift Knob! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.

Parts List

COBB Knob

Open

Also available in black.

 

 

(2) O-Rings for collar

 

Black Collar

 

Red Collar

 

Tools Needed

• Some sort of device for grasping and turning or one skilled with opening doors

Stock Knob Removal

1. Grasp the stock knob and turn it counter-clockwise to remove
   
   
   

    

   
   
   

2. Make engine noises and pretend to shift with the threaded end of the shifter just because. Bonus points if someone catches you and you have an awkward moment of eye contact.
   
   

    

Knob Pre-Assembly

1. Apply a small amount of the supplied grease to the o-ring, then install it onto the groove in the knob.
   
   

   
   
   

2. You can now slide the colored ring of your choice onto the knob

Knob Installation

1. Spin the knob onto the shifter shaft clockwise until relatively tight. Then pull the shift boot collar up until it snaps into place on the lower portion of the shift knob.
   
   
   

    

   
   
   

2. You’re all done! Go out and enjoy!

CARB Sticker Application

(Where Applicable)

1. Apply the supplied CARB sticker in a clear, easy to find location.  Typically underhood, or on the radiator core support.