Civic Type R FL5 / Integra Type S DE5 Radiator Hoses
BH2405-BK - FL5 Type R / DE5 Type S Radiator Hoses
2023 - 2024 Honda Civic Type R
2023 - 2024 Integra Type S
Congratulations on your purchase of the COBB Tuning Radiator Hoses! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Parts List
Tools Needed
Sockets
3/8"
3/8" ratchet
3/8" 12" extension
5.5mm socket
Hand Tools
Phillips head screwdriver
Flathead screwdriver
Pliers
Misc.
Drain pan
Spill-Free coolant bleeding funnel
Stock Hose Removal
Park your car in a flat, level area and allow it to cool down completely. When in doubt, put gloves on and gently squeeze the radiator hoses to make sure the cooling system isn’t under pressure any longer.
Your car will need to be on jack stands or a lift to do this job as we’ll be going under the car to get to the drain and lower radiator hose. If you can't lift and support the car properly on jack stands or a lift, it’s a good time to take your car somewhere else to do this job safely.
You can either completely remove the intake, or just remove the connecting hose that goes over the radiator hoses. If you want to remove the intake there are two 10mm bolts down on the frame holding the airbox in place, unclip the MAF sensor, and then remove the accordion coupler from the engine side using a #1 Phillips screwdriver or 5.5mm socket. Otherwise you can just remove the accordion coupler using your Phillips screwdriver.