571100 - MAZDASPEED3 Gen1 SS Cat-Back Exhaust
Mazda3 MPS 2007 - 2009
Mazdaspeed Axela 2007 - 2009
Mazdaspeed3 2007 - 2009
Congratulations on your purchase of the COBB Tuning Mazdaspeed3 cat-back exhaust!! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
3/8" ratchet
3/8" 12mm socket
3/8" 14mm socket
Before removing your stock exhaust system, make sure it is completely cool, failure to do so can result in burning yourself on hot components. |
This installation will require cutting of the factory exhaust or removal of the entire rear subframe and suspension. If you do a clean job cutting it you'll be able to add a flange or slip fit in place to reinstall your stock exhaust more easily later on. |
COBB Product Install Instructions for Mazda Vehicles
Main Installation Instruction Repository for Mazda Parts
Link to Mazda Map Notes to see what map you should be on given the parts you've added