772600 – Mazdaspeed3 Gen2 Front Mount Intercooler
Mazda3 MPS 2010 - 2012
Mazdaspeed Axela 2010 - 2012
Mazdaspeed3 2010 - 2013
Congratulations on your purchase of the COBB Tuning Mazdaspeed Gen 2 Intercooler! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
3/8" ratchet
3/8" 8mm socket
3/8" 10mm deep socket
3/8" 12" extension
3/8" 6" extension
We suggest checking with the dealer to see if your car may be a candidate for the Mazda recall on one or more of the engine mounts, or invest in some stiffer after market engine mounts before starting on the installation of the COBB FMIC. Excessive engine movement may cause a properly fitting kit to rub
Loosely mount the intercooler mounting brackets to the intercooler using the supplied 1/4" - 20 stainless steel socket head cap screws and lock washers, along with a 3/16" Allen wrench in the fashion shown below. Repeat on the opposite side.
This product is covered under multiple CARB EO letters. For additional information on CARB EO options for your Mazda, check out our page CARB EO numbers for COBB Mazda Products
Install the supplied CARB sticker on an easily viewable space that won't be susceptible to large amounts of heat. We recommend on the radiator core support, or the underside of the hood.
COBB Product Install Instructions for Mazda Vehicles
Main Installation Instruction Repository for Mazda Parts
Link to Mazda Map Notes to see what map you should be on given the parts you've added