This feature is enabled on all OTS ECU Maps V102 and later
The vehicle will need to meet the following conditions for the ECU to allow it to happen.
Adjustments are available on the Accessport directly.
1.Go into the Tune Menu
2. Select "Adjustments"
3.From there select Launch Control Rev Limit Slot
4.Select your desired slot. These slots are completely customizable through our Accesstuner Pro software, however the default slot RPM values are as follows.
5. The load target for Launch Control can also be adjusted with Launch Control Load Offset. Load can be increased from this adjustment menu between 0 and 300 Nm above what your OTS map or Protune is calibrated to target. This may be beneficial if you're using stickier tires and find that the car is bogging down during launch.
To view your map's load target for Launch Control, check out the monitor 'LC Engine Load Target' in the Gauges section of your Accessport. Increases made to LC Load Offset will be reflected in this monitor:
LC Engine Load Target = (LC Load Target table values) + (LC Load Offset)
WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL. THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE |
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059