7P1100 - High Flow Filter for 981 Cayman / Boxster
Vehicle Coverage
Congratulations on your purchase of the COBB Tuning xxxxxxxxxxxxx! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
IMPORTANT! Installing this kit will require custom tuning or utilizing an appropriate Stage Power Package map if you have a matching mechanical configuration. Please consult with COBB or an authorized ProTuner in your area if you have any questions!
Table of Contents
Parts List
- 2 x COBB High Flow 981 Filters
- 4 x 1/4" Hex Screws
Tools Needed
Sockets
3/8"
Hand Tools
Stock Component Removal
- Park your car in a flat level area.
- Pop the hatch open.
Remove the carpeted panel on either side by simply pulling outward firmly.
Throughout the interior removal keep an eye on the small plastic cones. They are critical for re-fitting the panels and have a tendency to get left behind in the holes or fall behind interior panels.
- On either side near the trunk rail weather-stripping gently peel it back in order to get a trim tool behind it and remove the trim.
Filter Installation
Section 3
Section 4
Section 5
Links
MAP Notes
Helps to figure out which map you should be on given the parts installed to your car
Links for related parts
COBB Customer Support Web Support and Tech Articles: COBB Tuning Customer Support Center Email: support@cobbtuning.com Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST) 866.922.3059 return to www.cobbtuning.comContact Us: