If you're familiar with tuning the GTR you'll know that the factory system for cutting boost pressure doesn't always work as well as it should. As such we've created our own custom version that should be able to help provide consistent, accurate cutting to avoid issues with boost creep or over-boosting. This encompasses two different tables.
Boost Cut Delay (COBB)
This value specifies a delay, in seconds, that your boost pressure must exceed the value presented in the Boost Cut Primary (COBB) table before a fuel cut will occur. This essentially allows the car to see that pressure for a certain amount of time before cutting the car, you can drop it to zero if you want an immediate cut, or add a delay if you're okay with the vehicle seeing the occasional boost pressure spike as long as it doesn't last very long.
Boost Cut Primary (COBB)
This table allows better for better control of the fuel cut when the vehicle reads that it is over the boost target. The OEM overboost fuel cut isn't always reliable, as such for optimum safety and control over your boost pressure it is recommended to use this custom table instead. Raise the OEM boost cut table values to their max and populate this table with your desired fuel cut thresholds in Manifold Relative Pressure (Sea-Level).
Note: If you set these values higher than what your MAP sensor can read, overboost fuel cut will never occur.
