971250 – Mazdaspeed3 Lightweight Tubular Anti-Sway Bar Kit
2007+ Mazda 3
Congratulations on your purchase of the COBB Tuning Mazdaspeed Tubular Anti-Sway Bar Kit! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.
Table of Contents
Parts List
- Front sway bar
- Rear sway bar
- (2)Front bushings and brackets
- (2)Rear bushings and brackets
Tools Needed
- Phillips head screwdriver
- Flathead screwdriver
- 3/8" 7mm socket
- 3/8" 16mm socket
- 3/8" 17mm socket
- 3/8" 18mm socket
- 3/8" 19mm socket
- 3/8" 21mm socket
- 3/8" 14mm deep socket
- 3/8" 15mm deep socket
- 3/8" T50 Torx Bit
- 3/8" E10 inverted Torx
- 3/8" E12 inverted Torx
- 3/8" E14 inverted Torx
- 3/8" E18 inverted Torx
- 1/2" breaker bar*
- 1/2" 16" extension*
- 1/2" 14mm socket*
- 1/2" 23mm deep socket
- 14mm offset wrench
- Oxygen Sensor Wrench
- 7mm Hex Driver
- M3 Allen Key
- M4 Allen Key
- M10 Allen Socket
- 8mm Ratcheting combination wrench
- 10mm combination wrench
- 11mm combination wrench
- 12mm combination wrench
- 13mm combination wrench
- 14mm combination wrench
- 15mm combination wrench
- 16mm combination wrench
- 17mm combination wrench
- 18mm combination wrench
- 19mm combination wrench
- 21mm combination wrench
- Torque Wrench
- Torque Wrench
- Trim removal tool
- Hose cutter
- Drain pan
Section 1
Section 2
Section 3
Section 4
Section 5
Links
MAP Notes
Helps to figure out which map you should be on given the parts installed to your car
Links for related parts
Customer Support
Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)
866.922.3059