Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

Supported Vehicles

  • USDM Explorer ST

    • 2020 - 2024


Map Revisions:

Unlike many other vehicles, the engine and transmission are controlled by the same module. As such when choosing an ECU and Transmission tune will be flashed with the same file.

ECU Map Versions

TCM Maps

  • Stage0 v101

  • Stage1 v101

  • Performance Tow v101

  • Simulated Stock

  • OEM+

  • Sport

Required Accessport Firmware

  • AP3-FOR-012: 1.7.4.2-24611

Map Availability:

All maps come pre-installed on the Accessport. Download maps via the 

Custom Features


Fuel Requirements:

Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

  • Maps designated with "87 OCT or 91 RON " are for use with 87 and 89 octane/91 RON fuel or better.

  • Maps designated with "91 OCT or 95 RON " are for use with 91 and 92 octane/95 RON fuel or better.

  • Maps designated with "93 OCT or 98 RON" are for use with 93 octane/98 RON fuel or better.

    • 94 octane with 0% Ethanol should run the ACN91 Map.

Running 0% Ethanol Fuels

These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 


Peak Increase compares the highest value present for each run regardless of RPM

Max HP/TQ is the largest difference when comparing stock vs tuned at a single RPM point

Average HP/TQ refers to the average value present over the entire RPM range

Power Output

Stage1 Hard Parts Requirements

  • Exhaust Requirements: Stock or upgraded catback exhaust.

  • Intake Requirements: Stock air box and filter.

  • Intercooler Requirements: Stock

  • Boost Level: 21.75 psi +/- 1.5 psi tapering down as you reach redline.

Non-Performance ECU Maps

Stage0

An Engine map with stock calibration for diagnostic use

Simulated Stock

A Transmission map with stock calibration for diagnostic use

Flashing to the Stage0 or Simulated Stock map is not the same as uninstalling from the vehicle


Transmission Tunes

Unlike many other vehicles, the engine and transmission are controlled by the same module. As such when choosing an ECU and Transmission tune will be flashed with the same file.


Closing Warnings and Precautions:

  • Use of inappropriate calibration/modification combinations will promote engine damage.

  • Top Tier gasoline should be used where available. Use of lower quality fuels can result in catastrophic engine damage.


Version

Notes

v101

Misc. bug fixes and improvements.

v100

Initial Release


Contact Us:

COBB Customer Support

Web Support and Tech Articles: COBB Tuning Customer Support Center

Email: support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059


return to www.cobbtuning.com

  • No labels