Applicable Model/Year:
USDM Civic Type R 2017-20221
How To Use Launch Control
Begin driving in any gear
Depress and hold the throttle pedal to100%
As you approach redline, engage the clutch but keep the throttle pedal at 100%
Shift the gear lever to the next gear in the order
Release the clutch and continue accelerating
How To Enable:
This feature is enabled on all OTS Maps
The vehicle will need to meet the following conditions for the ECU to allow it to happen.
Accelerator Pedal Position above 80% depressed
Above 21.8mph
Available Adjustments and How to Make them:
Adjustments are available on the Accessport directly.
Naviagate to the Tune menu
Select Adjustments
Select Flat Foot Shift Rev Limit
Set a target RPM between 3000-8000 rpm
Hit the center button to save, then go give it a try! (in a safe responsibe manner)
Flat Foot Shift Monitors
FFS Rev Limit
Current flat foot shift rev limit
FFS State
Current flat foot state. Monitor is a sum of any or all options below.
1 | FFS Disabled |
2 | Vehicle Speed Ready |
4 | Accel. Pedal Ready |
8 | Clutch Pedal Ready |
16 | Not Used |
32 | Not Used |
64 | Real Time Override |
128 | FFS Active |
Things To Look Out For:
WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL. THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE
Related Articles:
COBB Customer Support Web Support and Tech Articles: COBB Tuning Customer Support Center Email: support@cobbtuning.com Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST) 866.922.3059 return to www.cobbtuning.comContact Us: