Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »













Stage 1 91 718 Base

Stage 1 93 718 Base





718 (982) Base 2.0TPeak GainsMax Gains
Stage1 91

+9.30% HP, +4.29% TQ

+11.26% HP, +11.21% TQ 
Stage1 93

+14.95% HP, +7.59% TQ

+15.99% HP, +16.19% TQ 

Results may vary 


Stage 1

  • Exhaust Requirements: Stock
  • Intake Requirements: Stock air box with stock, K&N, or BMC air filter 


Stage 0

  • Stock calibration. Factory map that the car was delivered from Porsche with. Does not uninstall Accessport.

OTS Maps are not compatible with iPE Exhaust systems or any other valved exhaust system that isn't controlled by the factory computer.



Peak Gains are measured as the absolute maximum value between the highest points of two plots.
Max. Gains are measured as the average maximum value between the highest and lowest point of two plots.

Dyno results and gains are from first party testing on external dyno and blended 93 octane due to lack of vehicle and fuel availability to COBB for in house testing.



Map Version Notes: 

Version

Notes

V300

New ROM compatibility for Certain 2021 Boxster/Cayman S Vehicles Only
Other vehicles uprevved for parity

V200

Updated to improve power and drivability. (Cayman / Boxster S only)

V104

For new ROM compatibility

V103

Back end software improvements.

V102

Fix for incorrect DTC issue.

V101

Back end software improvements.

V100

Initial Release Calibration. Adjusted ignition timing, airflow limits, throttle limits, and fuel as well as other tables that help maintain drivability and increase performance all while maintaining reliability.

  • No labels

Copyright 2023 © COBB Tuning Products LLC. All Rights Reserved. | www.cobbtuning.com