How To:Activate Burnout Mode on Volkswagen MK6 Vehicles

Applicable Model/Year:

MK7 GTI
MK7 Golf R

How To Enable:

This feature is enabled on all OTS Maps

The vehicle will need to meet the following conditions for the ECU to allow it to happen.

Coolant Temp Min-Max (160F - 250F)
Engine Oil Min-Max (160F - 250F)
EGT MAX (1835F)
Steering Wheel Angle (within 20 degrees of being completely straight)

Steps to Use:

Golf R Will need to be set to "Dyno Mode" in order to disable the rear axle. If enabled the car will essentially just launch itself with a higher RPM than launch control would otherwise allow.
How to: Put MK7 Golf R in "Dyno Mode" (FWD)

Manual Transmission

Engage the parking brake
Enable cruise control
Press and hold the cruise control "set" button
Depress and hold the clutch pedal to 100%
Move the shifter to 1st gear
Depress and hold the throttle pedal to 100%
Release the clutch pedal
Continue to hold the "set" button for as long as you'd like to do the burnout

DSG Transmission

Engage the parking brake
Enable cruise control
Press and hold the cruise control "set" button
Depress and hold the brake pedal to 100%
Move the shifter to Sport Mode
Depress and hold the throttle pedal to 100%
Release the brake pedal
Continue to hold the "set" button for as long as you'd like to do the burnout

Things To Look Out For:

WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL. THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE

COBB Custom Features: Burnout Mode on MK6 Vehicles