How To: TPMS Relearning
Applicable Vehicles :
- Fiesta ST 2014-16
How to tell if you have a problem :
In the event that your TPMS sensor has gone bad and needs to be replaced, or has somehow un-linked from your vehicles computer. Use these procedures to teach the vehicle the signals for each TPMS sensor.
How to Fix Problem:
To go through this process you will require a TPMS-19 transmitter (part number TPMS-19-8C2Z-1A203-A)
- Verify TPMS light is on
- Verify the tires are inflated to factory recommended PSI (39 front, 36 rear)
- While sitting in the car and with the door closed press and release the brake pedal
- Without starting the engine press the Start/Stop ignition button 5 times.
- Press and release the brake pedal.
- Press the ignition button to turn it off.
- Without starting your engine, press the ignition button 5 times.
- The horn will sound once and a message to train the left front tire will appear on your touchscreen
- Go to the left front tire and hold the transmitter against the sidewall of the tire closest to the valve stem and depress the button one time.
- Once properly activated at that wheel the horn will sound once.
- Continue around the vehicle at each wheel in order going clockwise.
Definitions:
- TPMS
- Tire Pressure Monitoring System