These instructions will explain the process for removal of the ECU on the Porsche 991.2 Targa models. These instructions differ from the Carrera, Turbo, and Cabriolet models because the bumper cover will require full removal.
COBB Tuning would like to give a special thanks to BBi Autosport for assistance creating this document.
Tools Needed
- Flathead screwdriver
3/8" ratchet
3/8" 10mm socket
3/8" T30 Torx Bit
- 3/8" T25 Torx Bit
- 3/8" T45 Torx Bit
- Masking Tape
Estimated Removal Time: 2+ hours