Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

8F3600-CLR, 8F3600-GRY, 8F3675 – Hitch Covers

Fit Most 2" Class 3 & 4 Receivers


      

Congratulations on your purchase of the COBB Tuning Hitch Cover! The following instructions will assist you through the installation process. Please read them BEFORE beginning the install to familiarize yourself with the steps and tools needed. If you feel you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified and experienced automotive technician.




Table of Contents


Table of Contents



Parts List

  • Hitch cover
  • (2) o-rings




Section 1

  1. Find your vehicle.
    Image Removed
    Image Added


  2. Make sure the suspension is broken in properly

    Widget Connector
    width545
    urlhttps://www.youtube.com/watch?v=a-6ilRAdPQo



  3. Make sure it has the proper sized class 3 or 4 receiver.  (2")
    Image Removed
    Image Added


  4. Park it in a flat level area.
    Image Removed
    Image Added


  5. Approach the vehicle with respect




  6. Have a quick cup of coffee
    Image Removed
    Image Added


  7. Slide the o-rings onto the hitch from the back.
    Image Removed
    Image Added


  8. Add a small amount of grease to the receiver and o-rings to prevent corrosion of your receiver itself.  The cover is powdercoated so it shouldn't be an issue on that.

  9. Gently slide the hitch cover into the hitch with the bolt holes going across side to side rather than up and down.

  10. Choose which pin location fits best, there are two, one may fit more flush than others.
    Image Removed    Image Removed

    Image Added

    Image Added

  11. You're all done!  Go out and enjoy.






Excerpt Include
PRS:Contact Us:
PRS:Contact Us:
nopaneltrue

COBB Hitch Lock