Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents


COBB Custom Features: How to Use Flat Foot Shift on MQB Vehicles


Applicable Model/Year: 

  • MK7 GTI
  • MK7 Golf R
  • MK7.5 GTI
  • A7 Jetta GLI
  • Audi 8V S3

Insert excerpt
What is MQB?
What is MQB?
nopaneltrue



How To Enable:

This feature is enabled on all OTS Maps



Steps to Use: (Manual Transmission Only)

  • Begin driving in any gear
  • Depress and hold the throttle pedal to 100%
  • As you approach redline, engage the clutch but keep the throttle pedal at 100%
  • Shift the gear lever to the next gear in sequence
  • Release the clutch and continue accelerating

In order to optimize traction there are specific limits in each gear on the OTS maps.

1st4500
2nd4700
3rd4700
4th5000
5th5167
6th5334




Available Adjustments and How to Make them:

Note: When adjusting the value this will override any specific per-gear RPM limits used and it will only be this limit in all gears

  1. Go to the Tune Menu


2. From there select "Adjustments"


3.In the Adjustments menu there will be an option called "Flat Foot Shift Rev Limit" This will set how high the limiter goes.


4.Select your desired flat foot shift RPM limit





Things To Look Out For:


Info
iconfalse

WARNING - THESE FEATURES ARE ABUSIVE TO THE ENGINE, CLUTCH, TRANSMISSION, AXLES, TIRES, AND DIFFERENTIAL.  THE USER ACCEPTS ALL RISKS AND RESPONSIBILITIES WHEN USING THIS FEATURE




Related Articles:

COBB Custom Features: Burnout Mode on MQB Vehicles

COBB Custom Features: Launch Control on MQB Vehicles

Widget Connector
urlhttps://www.youtube.com/watch?v=sdFuw5kcItM



Customer Support

support@cobbtuning.com

Phone support available 9am to 6pm Monday-Thursday. 9am to 4pm Friday (CST)

866.922.3059