Supported Vehicles:
- 2017-2019 Porsche Carrera (991.2) Base MT/PDK WM
- 2017-2019 Porsche Carrera (991.2) S MT/PDK WM
- 2017-2019 Porsche Carrera (991.2) 4 MT/PDK WM
- 2017-2019 Porsche Carrera (991.2) 4 S MT/PDK WM
- 2017-2019 Porsche Carrera (991.2) GTS MT/PDK WM
- 2017-2019 Porsche Carrera (991.2) 4 GTS MT/PDK WM
- 2018-2019 Porsche Carrera (991.2) T MT/PDK WM
Map Revision:
Map | Version # |
---|---|
Simulated Stock | v100 |
COBB OEM+* | v100 |
COBB Sport | v100 |
COBB Sport+ | v100 |
COBB Aggressive | v100 |
PDK Tuning Activation:
- If you did not initially purchase your Accessport with PDK support, please contact the COBB Tuning customer service team via phone or email.
Required Accessport Firmware:
- AP3-POR-011-PDK: 1.7.3.1-16736
Map Availability:
- Download from the COBB Tuning Porsche Map Database
ECU Map Note Locations:
PDK Relearn
A step-by-step guide on how to perform this procedure with the Accessport can be found here: How To: Perform PDK Clutch Re-Learn
Over time clutches can wear and the thickness can decrease. Performing a PDK relearn will help the PDK verify clutch thickness and position. This is particularly useful after a clutch replacement or in cars with higher mileage.
The adaption process an be quite loud and the car may clunk or lurch somewhat violently. This is normal during the adaption process.
Widget Connector url https://www.youtube.com/watch?v=RB_p1xEDbSo
Closing Warnings and Precautions:
Use of inappropriate calibration/modification combinations may promote transmission damage.
If the COBB High Torque map is flashed to the TCU a A PDK relearn may be required when switching from the High Torque map to other COBB maps or uninstalling. PDK Relearn instructions are located above.
Some higher mileage PDK cars may have driveability problems that may be exacerbated by flashing the PDK, most notably a shutter when starting from a stop at low throttle in 1st gear or reverse. In most cases a simple PDK fluid service is all that is needed to remedy the issue, however the issue may be more indicative of a failing valve body. A PDK Relearn will unfortunately not fix this issue. We suggest doing a PDK fluid service before installing the PDK flash if you are still running original fluid regardless of milage.
Revision Notes:
Revision # | Notes: |
---|---|
v100 | Initial Release |