| Table of Contents |
|---|
| minLevel | 1 |
|---|
| maxLevel | 1 |
|---|
| outline | false |
|---|
| style | default |
|---|
| type | flat |
|---|
| printable | false |
|---|
|
...
Gateway Datalogging and Monitor List
| Panel |
|---|
| panelIconId | 1f33d |
|---|
| panelIcon | :corn: |
|---|
| panelIconText | 🌽 |
|---|
| bgColor | #E3FCEF |
|---|
|
In the datalog presets we offer a CanGatewayTroubleshoot preset in order to troubleshoot any DTC’s. two preset datalog lists specifically for CAN Gateway Flex Fuel. CANGatewayGeneral will have most of the monitors important as an end user to get an idea as to what is going on with the vehicle under normal driving conditions, or when you’re having an issue. CANGatewayTroubleshoot is typically going to have monitors that we want to see to do internal troubleshooting, so having a log to send to our customer support team can be helpful.
If you’re not sure your car is safe to run or drive with the DTC you’re getting, reach out to our customer support team . |
...
and chat with them first! |
| Expand |
|---|
| title | Gateway Specific Monitor List (For diagnosis) |
|---|
|
Accessport Name | AccessTuner Pro Name | Definition |
|---|
Ethanol ERROR | Ethanol ERROR | Error code from Ethanol Content Sensor via gateway | Ethanol Fuel Temp | Ethanol Fuel Temp | Fuel temperature from fuel temp sensor integrated into ethano lcontent sensor. | Ethanol Fuel Temp Error | Ethanol Fuel Temp Error | Error code from fuel temp sensor integrated into ethanol content sensor via gateway. | Sns Fuel Press MONITOR | Sensor Input Fuel Pressure Monitor | Fuel pressure from Gateway fuel pressure sensor | Sns Fuel Press ERROR | Sensor Input Fuel Pressure Error | Error code from Fuel Pressure Sensor via gateway 1 = Analog voltage high ‘out-of-range’ error (>4.75v) 2 = Analog sensor low ‘out-of-range’ error (0.1v-0.25v) 7 = Analog sensor no signal error (may be shorted to ground) (0 - 0.1v)
| Sns Fuel Press VOLTS | Sensor Input Fuel Pressure Voltage | Voltage output of Fuel Pressure Sensor |
|
...
COBB5
Maximum Safe Ethanol Concentration Exceeded
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
The ethanol content is continuously over the limit set in Ethanol Sensor DTC Max. Safe Ethanol Concentration for Tune (C0BB5 DTC) |
| Expand |
|---|
|
Typically set if the tuner wants the vehicle to be limited on ethanol content. |
| Expand |
|---|
| title | What is caused it and how do I fix it? |
|---|
|
This can happen if the Gateway harness is loose, shorted or not plugged in correctly to the vehicle side or the Gateway side. Or if the fuse has blown in the power feed for the Gateway. Double-check your connections and that there is no physical damage to any of the components |
...
COBB8
Gateway Module Not Detected
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
When starting the car up the ECU was unable to communicate with the COBB Gateway module. |
...
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
This can happen if the Gateway harness is loose, shorted or not plugged in correctly to the vehicle side or the Gateway side. Or if the fuse has blown in the power feed for the Gateway. Double-check your connections and that there is no physical damage to any of the components |
...
COBB9
...
|
Lost communications with Gateway module| Expand |
|---|
| title | Why am I getting it? |
|---|
|
If the Gateway was communicating properly at startup but later lost communication with the vehicle this DTC will come up |
| Expand |
|---|
|
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable. |
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
This can happen if the Gateway harness is loose, shorted or not plugged in correctly to the vehicle side or the Gateway side. Or if the fuse has blown in the power feed for the Gateway. Double-check your connections and that there is no physical damage to any of the components |
...
COBBA
...
|
Gateway firmware is the incorrect version.| Expand |
|---|
| title | Why am I getting it? |
|---|
|
This will come up if the firmware on the Gateway module itself is out of date, or if the map version is too old compared to the gateway. |
| Expand |
|---|
|
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable. |
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
If there is an important update to the Gateway firmware or COBB software and maps that is not backwards compatible, you will see this message |
...
COBBB
...
. The best resolution is to update your gateway and go to the most recent OTS maps, if you have a Protuner you may need to reach out to them to have your map resaved with the most recent changes. |
...
COBBB
CAN Gateway General Packet Error
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
The gateway is getting invalid information |
...
| Expand |
|---|
|
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable. |
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
...
COBBC
...
|
Gateway is receiving or sending invalid information. Reach out to customer support for next steps for troubleshooting. |
...
COBBC
Gateway Custom Sensor Error
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
If you have a custom sensor enabled and it is throwing an error. Or a general error that impacts all sensors has happened |
...
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
This can be caused by having a fautly sensor/a sensor that is not correct for your calibration, loose connection between the gateway and sensor, or by something in the map being set up incorrectly. Double-check your connections and that your sensor is correct and plugged in, then reach out to COBB or your custom tuner for additional assistance.
|
COBBD
...
...
COBBD
Gateway Inconsistent Sensor
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
Information for a given sensor is being received inconsistently. |
| Expand |
|---|
|
To avoid unwanted issues if (for example) you were on higher ethanol content and you lost communication with the gateway, you will see a few other DTCs for things as well as their failsafes will enable. |
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
This will be thrown if one of the sensor cables isn’t connected properly or is potentially bad. |
...
COBBE
...
Gateway Ethanol Sensor Error
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
The gateway is seeing an issue with the Ethanol content sensor. |
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
Sensor cable is detected but no sensor signal is present (Check your wiring connections.) Fuel content error (due to contamination either material, water, or fuel type) Sensor data is out of range (from contamination, short, or fuel type) Ethanol content is out of range
Monitors |
...
| Insert excerpt |
|---|
| PRS:Contact Us: |
|---|
| PRS:Contact Us: |
|---|
| name | Contact Us: |
|---|
| nopanel | true |
|---|
|