you're certain everything is attached correctly contact support. |
E10F6 | COBB CAN Gateway Data Requested Module Inactive | Map is setup for the gateway but the gateway is not responding or is inactive | Gateway not responding or inactive, check connections and fuses. If everything works fine after 30 seconds, this board may have skipped the QA test, and should be returned to Cobb |
E1100 | Ethanol Sensor Configured But Not Detected | ECS is configured in the gateway but the harness and sensor are not detected | Ethanol content sensor and harness not detected, check all connection points. |
E1101 | ECS Fuel Error | Code provided from the ethanol sensor, should drop WGDC to zero. | Ethanol Sensor Fuel Type Error. Fuel may be contaminated, or the sensor may be clogged or damaged. |
E1102 | ECS Sensor Error | Code provided from the ethanol sensor, should drop WGDC to zero. | Ethanol sensor may be damaged, contact customer support. |
E1103 | ECS Fuel or Sensor Error | Code provided from the ethanol sensor, should drop WGDC to zero. | Ethanol sensor fuel type error. Fuel may be contaminated, or the sensor may be clogged or damaged. |
E1104 | ECS sensor data out of range | Code provided from the ethanol sensor, should drop WGDC to zero. | Ethanol sensor fuel type error. Fuel may be contaminated, or the sensor may be clogged or damaged. |
E1105 | Ethanol Sensor Unplugged | ECS configured and the harness is present but the sensor is likely unplugged. | Ethanol content sensor harness detected but no sensor found, check connection to sensor |
E1106 | ECS Fuel Temp Sensor configured but not detected | ECS is configured in the gateway but the harness and sensor are not detected | Ethanol content sensor and harness not detected, check all connection points. |
E1107 | ECS Fuel Temp Sensor out of range | Fuel temperature is out of range for sensor | Fuel temperature is out of the expected range - contact Cobb support and check for other Gateway DTC's. |
E1108 | ECS Fuel Temp Sensor Unplugged | ECS configured and the harness is present but the sensor is likely unplugged. | Ethanol content sensor harness detected but no sensor found, check connection to sensor |
E1109 | Fuel Pressure Sensor Configured But Not Detected | Fuel pressure sensor is configured in the gateway but the harness and sensor are not detected | Fuel pressure sensor and harness not detected, check all connection points. |
E110A | Fuel Pressure Sensor High Input V | input voltage from fuel pressure sensor is too high, may happen if using the incorrect sensor | Fuel pressure sensor input value too high, make sure you are using a gateway compatible sensor |
E110B | Fuel Pressure Sensor Low Input V | input voltage from fuel pressure sensor is too low, may happen if using the incorrect sensor | Fuel pressure sensor input value too low, make sure you are using a gateway compatible sensor |
E110C | Fuel Pressure Sensor Unplugged | Fuel pressure sensor configured and the harness is present but the sensor is likely unplugged. | Check connections with fuel pressure sensor or that fuel pressure sensor is operating properly. |