| Table of Contents |
|---|
| minLevel | 1 |
|---|
| maxLevel | 1 |
|---|
| outline | false |
|---|
| style | default |
|---|
| type | flat |
|---|
| printable | false |
|---|
|
...
Gateway Datalogging and Monitor List
| Panel |
|---|
| panelIconId | 1f33d |
|---|
| panelIcon | :corn: |
|---|
| panelIconText | 🌽 |
|---|
| bgColor | #E3FCEF |
|---|
|
In the datalog presets we offer two preset datalog lists specifically for CAN Gateway Flex Fuel. CANGatewayGeneral will have most of the monitors important as an end user to get an idea as to what is going on with the vehicle under normal driving conditions, or when you’re having an issue. CANGatewayTroubleshoot is typically going to have monitors that we want to see to do internal troubleshooting, so having a log to send to our customer support team can be helpful.
If you’re not sure your car is safe to run or drive with the DTC you’re getting, reach out to our customer support team and chat with them first! |
| Expand |
|---|
| title | Gateway Specific Monitor List (For diagnosis) |
|---|
|
Accessport Name | AccessTuner Pro Name | Definition |
|---|
Ethanol ERROR | Ethanol ERROR | Error code from Ethanol Content Sensor via gateway | Ethanol Fuel Temp | Ethanol Fuel Temp | Fuel temperature from fuel temp sensor integrated into ethano lcontent sensor. | Ethanol Fuel Temp Error | Ethanol Fuel Temp Error | Error code from fuel temp sensor integrated into ethanol content sensor via gateway. | Sns Fuel Press MONITOR | Sensor Input Fuel Pressure Monitor | Fuel pressure from Gateway fuel pressure sensor | Sns Fuel Press ERROR | Sensor Input Fuel Pressure Error | Error code from Fuel Pressure Sensor via gateway 1 = Analog voltage high ‘out-of-range’ error (>4.75v) 2 = Analog sensor low ‘out-of-range’ error (0.1v-0.25v) 7 = Analog sensor no signal error (may be shorted to ground) (0 - 0.1v)
| Sns Fuel Press VOLTS | Sensor Input Fuel Pressure Voltage | Voltage output of Fuel Pressure Sensor |
|
...
COBB5
Maximum Safe Ethanol Concentration Exceeded
| Expand |
|---|
| title | Why am I getting it? |
|---|
|
The ethanol content is continuously over the limit set in Ethanol Sensor DTC Max. Safe Ethanol Concentration for Tune (C0BB5 DTC) |
| Expand |
|---|
|
Typically set if the tuner wants the vehicle to be limited on ethanol content. |
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
This can happen if the Gateway harness is loose, shorted or not plugged in correctly to the vehicle side or the Gateway side. Or if the fuse has blown in the power feed for the Gateway. Double-check your connections and that there is no physical damage to any of the components |
...
COBB8
Gateway Module Not Detected
...
| Expand |
|---|
| title | What caused it and how do I fix it? |
|---|
|
Sensor cable is detected but no sensor signal is present (Check your wiring connections.) Fuel content error (due to contamination either material, water, or fuel type) Sensor data is out of range (from contamination, short, or fuel type) Ethanol content is out of range
Monitors |
Maximum safe ethanol content level exceeded:
C0BB5 - Max. Safe Ethanol Concentration Exceeded - Enabled if Ethanol final exceeds the Ethanol Sensor DTC Max. Safe Ethanol Concentration for Tune (C0BB5 DTC) threshold continuously until Ethanol Sensor DTC Max. Safe Ethanol Concentration for Tune (C0BB5 DTC) Delay expires, while C0BB1 and C0BB2 are not set.
Each calibrator will need to decide what they deem to be the maximum safe ethanol content for the mechanical configuration and use.
Setting the Ethanol Sensor DTC Max. Safe Ethanol Concentration for Tune (C0BB5 DTC) threshold to 100.00% will disable this check.
General Failure Code
...
...
| Insert excerpt |
|---|
| PRS:Contact Us: |
|---|
| PRS:Contact Us: |
|---|
| name | Contact Us: |
|---|
| nopanel | true |
|---|
|