Versions Compared

Old Version 1

changes.mady.by.user Brandyn Mowat

Saved on

compared with

New Version Current

changes.mady.by.user Brandyn Mowat

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Image RemovedVLK_CXCA_5G0906259Q
Image Added

Supported Vehicles:

Volkswagen MK7.5 GTI (MT & DSG)

  • Audi A3 (8V) USDM

    • Sedan 2019-2020

    • Cabriolet 2019

Map Revision:

  • Anti-Theft Mode v105
  • Stage0 v105
  • Valet Mode v105
  • Stage1 91 v105
  • Stage1 93 v105
  • Stage2 91 v105
  • Stage2 93 v105
  • Stage3 91 v105
  • Stage3 93 v105

Map Availability: 

Map

Revision

Stage0
Stage1
Stage2

v201

Stage1+FF

v302

Required Accessport Firmware: 

  • AP3-VLK-002:

1

  •   1.7.

3

  • 4.

0-16029 or greater

COBB Custom ECU Features

  • COBB Custom Features: Burnout Mode on MK7 Vehicles
  • COBB Custom Features: How to Use Flat Foot Shift on MK7 Vehicles
  • COBB Custom Features: Launch Control on MK7 Vehicles
    • COBB Custom Features: COBB Traction Control on MK7 Vehicles

    • 2-24849

    Map Availability: 

    Info

    For more information on CARB Exemption Orders for this vehicle as well as the actual letter check out our page CARB EO numbers for COBB VW Products

    COBB Custom ECU Features:

    These cars offer a variety of added features such as launch control and traction control. For more information check out our guide COBB Custom Features: Volkswagen MQB Platforms

    Warning

    We've noticed a few simple issues can cause flashing your car to fail so it's critical to watch out for these problems.

    • A 10-12 amp battery charger

    is 

    • is CRITICAL to keep the voltage stable when flashing, if the voltage goes too low it can cause the flash to fail or brick the module.

    • If your key's battery gets low and dies or you walk away, the key can become disconnected from the car and cause the ECU to lose flash mode.

    • Make sure to disable bluetooth on your cellphone as the process in which it connects to the stereo can also cause the flash to fail.

    Image Removed

    Image Added

    Fuel Requirements:

    Each map lists the minimum required octane. A higher octane fuel can be used safely on a map designed for lower octane. DO NOT use maps designed for higher octane with lower octane fuels. Top Tier gasoline should be used where available.

    • Maps designated with "

    93

    • 91 OCT or 95 RON " are for use with 

    93 

    • 91 and

    94 

    • 92 octane/95 RON fuel or better.

    • Maps designated with "

    91

    • 93 OCT or 98 RON" are for use with 

    91 and 92 octane

    • 93 octane/98 RON fuel or better.

      • 94 octane with 0% Ethanol should run the ACN91 Map.

    Note

    Running 0% Ethanol Fuels

    These maps are designed for E10 fuel (fuel with 10% ethanol content). For those who only have access to E0 fuel (fuel with 0% ethanol) it is recommended to use the "91" and "ACN91" octane

    version

    If you are unfamiliar with how to datalog using the Accessport or what to look for, you can find a guide on our website here. 
     

    If knock or detonation is present even when using the appropriate fuel, try reflashing a map that is intended for a lower octane fuel. 

    Image Removed

    Stage 1 91

    Image Removed

    Stage 1 93 

    Image Removed

    Map

    Peak Gains*

    Stage1 91+26.4% HP / +32.4% TQStage1 93 +31.2% HP / +37.6% TQ

    Stage1

  • Intake Requirements : Stock airbox with stock air filter, drop-in replacement, or COBB Tuning SF Intake System
    • Exhaust requirements : Stock exhaust or upgraded cat-back exhaust

    versions of the maps and datalog the car to ensure your fuel is performing to the necessary level. This is especially important for those using Canadian 94 octane E0 fuel. 

     

    Image Added

    Stage1

    Appsplus tabs lite macro
    data{"theme":"COBB Final 3","features":["titles","active","rounded","hover"],"padding":10,"height":700,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"fullWidth","opacity":60,"activeColor":"#000000","activeColorBG":"#e10000","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e10000","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":3,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":false,"vertical":false,"preload":true,"animate":true,"uuid":"c2pUpfw53h","isNew":false,"loaded":false,"attachmentId":"att3094839547"}
    Appsplus tabs lite macro
    data{"theme":"gains theme","features":["titles","active","rounded","hover","separator"],"padding":10,"height":560,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"centered","opacity":60,"activeColor":"#000000","activeColorBG":"#e6e6e6","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e6e6e6","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":0,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":true,"vertical":false,"preload":true,"animate":false,"uuid":"vvx5nypu95","isNew":false,"loaded":false,"attachmentId":"att3095199806"}

    Stage1

    • CARB EO: D-660-37

    • Intake Requirements : 

    • Exhaust requirements : Stock exhaust or COBB MK7.5 Cat-Back Exhaust 5V2110

    • Boost Target:

      • 91 Octane 95 RON Minimum: ~22.5 psi peak boost pressure tapering down to ~13psi as you approach the 6800RPM redline, +/- ~2psi.

      • 93 Octane 98 RON Minimum: ~23.5 psi peak boost pressure tapering down to ~14psi as you approach the 6800RPM redline, +/- ~2psi.

    Stage 2 91

    Image Removed

    Stage 2 93

    Image Removed

    Map

    Peak Gains*

    Stage2 91+42% HP / +37.15% TQStage2 93+42% HP / +43.6% TQ

    Stage2

  • Intake Requirements : COBB Tuning SF Intake System
  • Exhaust requirements : Stock exhaust or upgraded cat-back exhaust
  • Intercooler: AMS Performance Front Mount Intercooler GTI
  • Drivetrain: Upgraded Clutch or DSG Software Recommended

    • Stage1+FlexFuel

    E## refers to the ethanol content (E) in % (##). So in the case of E10, it is 10% ethanol (Pump gas is typically between 7 & 15%)

    Appsplus tabs lite macro
    data{"theme":"custom","features":["titles","active","rounded","hover","separator"],"padding":10,"height":700,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"scrollable","opacity":60,"activeColor":"#000000","activeColorBG":"#e10000","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e10000","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":3,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":false,"vertical":false,"preload":true,"animate":true,"uuid":"dgDeoQ5mC0","isNew":false,"loaded":false,"attachmentId":"att3155755090"}
    Appsplus tabs lite macro
    data{"theme":"Gains Tabbed","features":["titles","active","rounded","hover","separator"],"padding":5,"height":450,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#c0c0c0","type":"fullWidth","opacity":60,"activeColor":"#000000","activeColorBG":"#c0c0c0","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e10000","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":3,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":false,"vertical":false,"preload":true,"animate":true,"uuid":"E_dO6qsiEC","isNew":false,"loaded":false,"attachmentId":"att3155886135"}

    Stage+Flex Fuel

    Peak Power is achieved at 30% ethanol content

    ~24

      • ~22.5 psi peak boost pressure tapering down to

    ~15 psi

      • ~13psi as you approach the 6800RPM redline, +/- ~2psi.

      • 93 Octane 98 RON Minimum:

     ~25

      •  ~23.5 psi peak boost pressure tapering down to

    ~16 psi

      • ~14psi as you approach the 6800RPM redline, +/- ~2psi.

    Stage 3 91

    Image Removed

    Stage 3 93

    Image Removed

    Map

    Peak Gains*

    Stage3 91+42% HP / +44.6% TQStage3 93+46.5% HP / +50.8% TQ

    Stage3

  • Intake Requirements : COBB Tuning SF Intake System
  • Exhaust requirements : COBB Tuning Turboback
    • Intercooler:  AMS Performance Front Mount Intercooler GTI

      • Ethanol: As much as an additional 2psi peak boost pressure with the most at 30% ethanol (E30)

    Panel
    panelIconId1f33d
    panelIcon:corn:
    panelIconText🌽
    bgColor#E3FCEF

    These maps are optimized for use with a stock fuel system. The stock fuel system is maxes out with a blend of E30 (30% ethanol). Ethanol content beyond E30 will trigger a custom COB13 DTC, indicating power output has been reduced.

    Stage2

    Appsplus tabs lite macro
    data{"theme":"COBB Final 2","features":["titles","active","rounded","hover","separator"],"padding":10,"height":650,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"fullWidth","opacity":60,"activeColor":"#000000","activeColorBG":"#e10000","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e10000","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":3,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":false,"vertical":false,"preload":true,"animate":true,"uuid":"ajWNXNu1y-","isNew":false,"loaded":false,"attachmentId":"att3095134324"}
    Appsplus tabs lite macro
    data{"theme":"gains theme","features":["titles","active","rounded","hover","separator"],"padding":10,"height":560,"tabFont":"Atlassian","tabSize":14,"tabBold":true,"tabItalic":false,"tabUnderline":false,"tabColor":"#000000","tabColorBG":"#e6e6e6","type":"centered","opacity":60,"activeColor":"#000000","activeColorBG":"#e6e6e6","borderWidth":null,"borderColor":"#ebecf0","radius":0,"hoverColor":"#ffffff","hoverColorBG":"#e6e6e6","iconSize":"small","iconInline":true,"iconPrimary":"#ffffff","iconSecondary":"#172b4d","separatorWidth":0,"separatorColor":"#000000","indicatorPercent":5,"indicatorColor":"#ff5630","indicatorColorBG":"#0052cc","hide":true,"vertical":false,"preload":true,"animate":false,"uuid":"cvJO1obS7t","isNew":false,"loaded":false,"attachmentId":"att3094806757"}

    Stage2

     ~25.5

      •  ~24 psi peak boost pressure tapering down to

    ~16

      • ~15 psi as you approach the 6800RPM redline, +/- ~2psi.

      • 93 Octane 98 RON:

      ~26

      •  ~25.5 psi peak boost pressure tapering down to

    ~17

      • ~16 psi as you approach the 6800RPM redline, +/- ~2psi

    .

    *Peak gains are measured as the difference between the highest points of the two plots. 

    *Largest gains are measured as the largest gain at any single point between the two plots.

    Results may vary. Power as tested on 2019 GTI DSG using these identical calibrations

      • .

     Generally speaking, the 91 octane calibration has a richer fuel curve and a less aggressive ignition advance map to help compensate for 91 octane fuel and/or less than ideal atmospheric conditions. The map designed for 93 octane is the most aggressive. 
    Map Version Notes: 

    Non Performance Maps

    Anti-Theft Mode

    • Will not allow vehicle to start

    Valet

    • Fuel Requirements:

      • 91 octane or better

    • Intake Requirements: Stock airbox and stock air filter

    • Exhaust Requirements: Stock exhaust

    • Boost Targets: Mechanical minimum

    • Rev Limiter: 3000RPM

    *Not intended for aggressive driving*

    High Altitude: 

    A quick note for those of you that live at higher altitudes: it is common for turbocharged cars at higher altitudes to run less boost pressure due to lower air pressure and air density. Your turbocharger has to work harder to compress a less dense air mass compared to the same turbocharger at sea level. This must be factored in when determining if your turbocharger is running the proper amount of boost pressure and not being pushed beyond its efficiency range. 
    Example: If you live in Denver at 5280 ft. and are trying to run a peak boost pressure of 15 psi, your turbocharger has to work the equivalent of making ~17.5 psi at sea level.
    There are barometric compensations within the factory ECU that lower boost targets as you climb in altitude in an effort to keep the turbocharger in its optimal range. The COBB performance maps utilize these compensations and therefore, it is perfectly normal for the final boost / load value to be lower than what is listed for your map.
     

    Revision Notes: 

    v105 –

    • No calibration changes.
    • This map has been updated to our Green Speed standard to ensure compliance with EPA and CARB regulations. This map eliminates unnecessary DTC suppression to ensure full environmental compliance.

    v104 –

    • Stage3 91/93 OTS maps have been released with bug fixes for CCF.

    v103 –

    v102 –

    • Revised map naming for parity.
    • Enabled Cobb Custom Features: Traction Control.

       Image Removed

    v101 –

    Enabled Cobb Custom Features: Launch control and Flat Foot Shift.  More details here - COBB Custom Features: Volkswagen MQB Platforms
  • Flat Foot Shift RPM (Per Gear):
    •           Image Removed
  • Burn out mode Rev. Limit:  5000 RPM
    • Launch Control Rev. Limit by speed/slot:Image Removed

    v100 –

    Revised ignition timing, primary fueling and boost levels for performance and safety

    Revision Notes: 

    Expand
    titleMap Revisions

    Version

    Notes

    v302

    Flex Fuel map initial release

    v201

    Fixed bug in CCF RPM Limiter

    v200

    Updated maps for backend updates. Fixed issue where CCF adjustments weren't working via AP on some maps.

    v108

    Factory Impulse Combustion bugfix

    v105

    Initial Vehicle Support

    Insert excerpt
    PRS:Contact Us:
    PRS:Contact Us:
    nopaneltrue